Tuesday, April 23, 2013

FIRST GRANDCHILD

Meet Evelyn Kathleen Nycz, born Tuesday, April 16th, 3lbs. 7 oz., 16 3/4 inches.  My new cute little grandbaby burrito.

Wednesday, March 6, 2013

ST. PATTY'S DAY MEDAL

I joined a swap on an on-line group where you had to make a medal using rubber stamps.  I came up with this Celtic medal.

With a pasta machine or rolling pin, roll brown polymer clay  to a 1/8 in. thickness.  Stamp the lace stamp (Judikins) with white pigment ink.  Cut out one of the lace points.  Set aside.

Roll gold polymer clay out to a 1/8 in. thickness.  Stamp with Celtic square from the Judikins Celtic Cube #1.

With a stirrer straw or toothpick, punch a hole in the bottom point of the lace and a corner of the Celtic square.  Bake both pieces according to instructions on polymer clay package.  Let cool

Paint the square with green mica gloss (Judikins).  Let try. With a little gold Rub n' Buff on your finger, highlight the design.

Adhere four emerald self-stick jewels to the lace piece.  Cover both pieces with Diamond Glaze (Judikins)
Use a gold paint pen to cover the sides and back of the Celtic square.

Take a small piece of ecru lace with picots on both edges wide enough so the picots extend on either side of the lace piece.  Mix some green mica gloss with Diamond Glaze to make a stiffener.  Swish the lace in the mixture making sure the entire piece of lace is covered.  Squeeze out the extra siffener.  I would suggest wearing rubber gloves for this procedure.  Flatten out the lace on a non-stick surface.  Press the polymer clay lace piece unto the real lace.  The Diamond Glaze will glue the pieces together.  Let dry completely.

Make a small bow out of 3/8 in. sheer green ribbon.  Glue to top of polymer clay lace piece.  Attach Celtic square to lace piece with a large oval jump rink.  Glue on a pin back.

Thursday, February 28, 2013

STAMPED CANDLEHOLDER

My wrist is now out of a cast and I'm back to crafting.  My first post-fractured wrist project is a stamped candleholder.  I picked up the square clear glass candle holder at a thrift store for $.50.  Check out your local dollar stores for candleholders to stamp on.

Clean your candleholder well.  Vinegar and water is good to clean glass with. 
Make sure the glass is completely dry before sponging.  I sponged all sides with an ochre permanent ink.  Acrylic paint would work just as well. 
Using a Judikins shell cube stamp, I stamped a different shell on each side with burnt sienna fluid chalk ink by Colorbox.  Again, acrylic paint would work just as well.  I heat set the fluid chalk ink.
I applied Distress Stickles in straw to the top rim and bottom half inch of the candleholder.  Real shells were glued to the bottom using the Distress Stickles as glue.
Put in a votive candle and you're all set for those summer nights.

Saturday, January 5, 2013

CRAFTING HIATUS

Due to a Christmas Day accident, I will be taking a "break" from crafting for a few weeks.  Check back in Feb. for updates.

Saturday, November 3, 2012

STAMPED TRAY

Those little black metal trays aren't just for mosaics anymore.  Many moons ago I picked up a stack of black metal trays approximately 6 x 9 at a garage sale for $1.00.  Apparently they were intended for a group mosaic project but never got there.  There were ten of them, they were cheap and they had craft potential, so I bought them.  A few years aging in my basement and they were ready for use.

I stamped the fan (Rub a Dub Dub) in gold permanent ink and sponged the same gold ink around the rim.  The image was colored with gel pens and Colorbox smooch ink.  When everything was dry, I sprayed a gloss sealer over the tray.  It looks nice standing on an easel as a decoration or sit it on your dresser for your perfume bottles.  You can find trays, trivets and coasters in the mosaic section of your craft stores.  If it has a flat surface you can stamp it.

Saturday, October 20, 2012

FAUX RAKU WITH CRAFT FOAM

I wanted to do a craft foam challenge on one of the on-line stamping groups I'm in and I came up with this faux raku pendant.

Heated tan craft foam on both sides with heat tool. Inked stamp (Sunday International) with dark brown Colorbox fluid chalk ink and pressed into softened foam. Blotted out some of the brown ink while still wet. Allow ink to dry. Squeeze drops of aqua and citrus Ranger alcohol inks randomly on piece. Blot some of the ink so it's not too dark. When dry, squeeze on a little Judikins diamond glaze and spread with finger. You just want to coat the piece to give it a shine. Allow to dry. Trip piece to fit it a 1 1/2 in. Ranger memory frame. String a necklace.

Craft foam, it's not just for kids anymore.

Monday, September 24, 2012

BACK TO SCHOOL TAG

Dragged my Slice machine out the other day and made a Back to School Tag.  The base tags were cut with the Fa La La card.  The bottom tag is 4 in. and the top tag is 3 1/2 in.  The top tag was stamped with the woodgrain rollergraph wheel.  The schoolhouse, bus, abc, and leaves were all cut with the Back to School card.  The schoolhouse was embellished by coloring the roof with a gray marker and then using a black pen to make roof tiles.  Yellow vellum was glued behind the windows and panes were drawn in.  Brown card stock was glued behind the door and a doorknob was drawn on.  The bell was colored with a gold marker.  The schoolbus was embellished by drawing the blacklines across the bus and coloring the wheels.  A silver marker made the hubcaps.  White vellum was glued behind the windows and a piece of black card stock was glued behind the door.  Leaves were cut and then veins were drawn in with brown.  ABC was cut in all three colors, then cut and put together.